|
 |
 |
 |
 DXL Series Magnetic-Vortex Flowmeter is a new kind of flowmeter developed by our company with advanced electromagnetic vortex detection technology, microprocessor and detecting element imported from America, original quick-discharge structure. It has features of compact structure, intuitive display, less power, wide turndown ratio, anti-corrosive, impurity-proof, etc. and can be used for flow meaeasurement of conductive liquid in the pipeline of industries such as oil petrochemical, metallurgy, machinery, brewage, printing, pharmacy, food, environmental protection, and so on.
there is no lining material and moving parting, which overcome the defects of block. Meanwhile, the structure of insert type core makes it easy to disassemble or calibrate and the same size and pressure core can be exchanged in different bodies. Besides, lithium battery and advanced electron technology make the flowmeter less power, high stability and anti-interference ability.
Patent N o.: 200610146055. | |
 |
XL Series Magnetic-Vortex Flowmeter is designed combining the electromagnctic induction law and Karman Street principle.When passing the bluff body (vortex generator),the conductive liquid will form regular and interlaced vortex.Incising the magnetic lines of force will cause the induced electromotive force whose frequency is same with the vortex.Within certain range the frequency is proportional to the flowtateand will be detected by the electrode and processed to dislay the flow valus
|  |
| |
|
1:Ambient temperature:-30¡æ ~ +50¡æ;
2:Relative humidity :¡Ü85%;
3:Atmospheric pressure:86KPa ~ 106 KPa;
4:Allowable liquids include water,wastewater ,acid ,lye,or other single-phase conductive liquid. | |
 |
body material:Cast Steel
body material:Stainless Steel | |
 |
1. The flowmeter should be mounted in the pipeline without influence of inflation, contraction, distort vibration of pipeline and magnetic interference in order to install, disassemble and operate easily in the future
2. The flowmeter should be mounted horizontally or vertically among the pipeline and straight tube not less times Nominal Diameter should be ensured upstream and downstream.
3. The flow direction of medium in the pipeline should be same with the arrow direction shown on the flowmeter.
4. Disassemble the alnico of flowmeter before putting into operation in the new pipeline, clean the impuritk medium and then assemble the alnico so that the flowmeter can work under good condition. If there impurities in the medium, the filter is recommended to be installed upstream. |
|
|
|
|
| |
 |
|
|
 |
|
|
 |
|
| |
